DriTac 5700 StrongBond

In stock

Request More Information

Unauthorized Enquiry

    Product Description

    Premium “Green” Pressure Sensitive Flooring Adhesive

    DriTac 5700 StrongBond is a contractor preferred, “green” resilient flooring adhesive that is formulated to provide an aggressive bond with high moisture resistance and low odor.

    Offering high initial tack and excellent shear strength, StrongBond is easy to spread and clean up. This “green” adhesive has been independently tested and certified by the Carpet and Rug Institute’s (CRI) Green Label Plus Program for Indoor Air Quality (IAQ)!


    • Helps Control Vinyl Plank Shrinkage
    • Moisture Control up to:
      • 8 lbs./ASTM F1869 Calcium Chloride Test
      • 90%/ASTM F2170 Relative Humidity Test
    • Permanent or Releasable Bond
    • “Green” Adhesive – CRI Certified!
    • Available in 1 and 4-gallon plastic pails.
    •   Bond
    •   Moisture Resistance
    •   Roller or Trowel Applied
    •   Zero VOC/Zero Solvent

    Flooring Types

    •   Carpet Tile
    •   Cork Tile
    •   Cork/Rubber/Foam Underlayments
    •   Fiberglass Backed Sheet Vinyl
    •   Luxury Vinyl Tile/Plank
    •   Rubber Flooring
    •   VCT

    Product News

    Vinyl Tile & Vinyl Plank
    Carpet Tile, Fiberglass Backed Sheet Vinyl
    (over porous substrates)

    1/16″ x 1/16″ x 1/16″
    Square notch
    200 sq. ft./gal. spread rate

    Vinyl Tile & Vinyl Plank
    Carpet Tile, Fiberglass Backed Sheet Vinyl
    (over non-porous substrates)

    Vinyl Sheet Goods,
    Rubber Sheet Goods
    (over porous substrates)

    1/16″ x 1/32″ x 1/32″
    U notch
    300 sq. ft./gal. spread rate

    Cork Tile/Cork/Rubber /Foam Underlayment
    (up to 1/4”)

    3/32″ x 3/32″ x 3/32″ V notched
    120 sq. ft/gal spread rate

    Cork Tile/Cork/Rubber /Foam Underlayment (greater than 1/4”)

    1/8″ x 1/8″ x 1/8″ square notched
    80 sq. ft/gal spread rate

    Recommended Applicator /Coverage: A smooth surface paint roller up to a 3/8″ nap is recommended. Coverage over porous substrates is up to 350 sq. ft./gal. (8.6 sq. meters/liter). Coverage over non-porous substrates is up to 400 sq. ft./gal. (9.8 sq. meters/liter). NOTE: Coverage is approximate and may vary depending on porosity of substrate and the amount of adhesive applied.