DriTac Flooring Products, LLC

Attention: JavaScript is disabled on your web browser! Unfortunately, without it, you will not be able to utilize our website. Javascript is a web language which provides functional enhancements. For help on how to enable Javascript (it's easy to do!), click here. If you need further help with our website or ordering our products, please contact customer service at (800) 394-9310 and reference this message.

DriTac 6200 Pressure Sensitive Flooring Adhesive

DriTac 6200 Premium Pressure Sensitive Flooring Adhesive is the most proven and time-tested adhesive for installing wood flooring, cork and vinyl tile, cork underlayments and other approved underlayments. With the tremendous popularity of Luxury Vinyl Tile and Luxury Vinyl Plank, DriTac is pleased to recommend DriTac 6200 for installing the following LVT flooring products:

Luxury Vinyl Tile

Luxury Vinyl Plank

DriTac 6200 Premium Pressure Sensitive Flooring Adhesive is the product of choice for professional wood, cork flooring, luxury vinyl tile and luxury vinyl plank installations. After years of successful use, flooring contractors, installers, and architects continue to find DriTac 6200 Premium Pressure Sensitive Flooring Adhesive has the superior tack, excellent bond strength and long open time ideally suited to commercial, residential and institutional applications.

Product Literature and Information
Installation Instructions	Brochure
Installation Instructions for Luxury Vinyl Tile & Luxury Vinyl Plank	Frequently Asked Questions (FAQs)
Installation Instructions for Cork Underlayment	Material Safety Data Sheet (MSDS)
Installation Instructions for Cork Tile	Testimonials

Floor Type	DriTac Trowel	Trowel Diagram*
Cork Tile / Parquet / Foam-Backed Parquet (depending on the conditions of the subfloor)	TR-1 1/8" x 1/8" x 1/8" U notch 80 sq. ft./gal. spread rate
Cork Tile / Foam-Backed Parquet Note: When installing cork tile 1/4 of an inch or less in thickness, DriTac recommends the use of DriTac trowel TR-3. When installing cork tile greater than 1/4 of an inch, DriTac recommends the use of DriTac trowel TR-1.	TR-3 3/32" x 3/32" x 3/32" V notch 120 sq. ft./gal. spread rate
Multi-Ply Engineered Plank (up to 5 inches wide)	TR-2 3/16" x 1/4" x 1/2" V notch 60 sq. ft./gal. spread rate
Vinyl Tile & Vinyl Plank (over porous substrates)	TR-8 1/16" x 1/16" x 1/16" Square notch 250 sq. ft./gal. spread rate
Vinyl Tile & Vinyl Plank (over non-porous substrates)	1/16" x 1/32" x 1/32" U notch 350 sq. ft./gal. spread rate
* Diagrams not to scale. Use DriTac adhesives with a properly notched trowel. All square footage rates are estimated. Rates will vary based on substrate condition and the angle the trowel is held to the subfloor. DriTac Warranties do not cover problems caused by improper use of installation products. Follow flooring manufacturer's written installation instructions. * When installed properly and given enough time for the moisture to "flash-off", DriTac 6200 has a proven track record of success and is an excellent choice for installing luxury vinyl tile and luxury vinyl plank. Please note, as with any installation, the adhesive will not prevent the expansion, shrinkage, cupping or curling of any of these products and is warranted for adhesion only.