DriTac Flooring Products, LLC

Attention: JavaScript is disabled on your web browser! Unfortunately, without it, you will not be able to utilize our website. Javascript is a web language which provides functional enhancements. For help on how to enable Javascript (it's easy to do!), click here. If you need further help with our website or ordering our products, please contact customer service at (800) 394-9310 and reference this message.

Easy Spread DriTac 7400 Urethane Wood Flooring Adhesive

Easy Spread DriTac 7400 was specially formulated to be very easy to spread. It is also easy to clean up when wet. Easy Spread is less fatiguing to trowel and allows installers to increase their productivity. Easy Spread DriTac 7400 is easier to remove from the pail, spread onto the subfloor and faster to apply. Easy Spread is non-slumping, low in odor and provides a high initial tack and permanent bond.

Product Literature and Information
Installation Instructions	Brochure
Material Safety Data Sheet (MSDS)

Floor Type	DriTac Trowel	Trowel Diagram*
Multi-ply engineered plank 3/8" up to 1/2" and 5/16" to 3/8" solid strip	TR-6 3/16" x 3/16" x 5/32" V notch 50 sq. ft./gal. spread rate
5/16" solid parquet, 1/4" engineered plank	TR-5 1/8" x 1/8" x 1/8" Square notch 80 sq. ft./gal. spread rate
3/4" solid shorts, 4' x 4' plywood	TR-4 1/4" x 1/4" x 1/4" Square notch 30 sq. ft./gal. spread rate
Greater than 1/2" engineered plank, 3/4" parquet and solid plank greater than 3/8" up to 1/2"	TR-7 1/4" x 1/4" x 1/8" Square notch 35 sq. ft./gal. spread rate
* Diagrams not to scale. Use DriTac adhesives with a properly notched trowel. All square footage rates are estimated. Rates will vary based on substrate condition and the angle the trowel is held to the subfloor. DriTac Warranties do not cover problems caused by improper use of installation products. Follow flooring manufacturer's written installation instructions.