Premium Pressure Sensitive Resilient Flooring Adhesive
DriTac 5800 ToughBond is a premium grade resilient flooring adhesive that is solvent-free with very low odor.
This adhesive helps contribute to LEED credits and has been independently tested and certified by the Carpet and Rug Institute’s (CRI) Green Label Plus Program for Indoor Air Quality (IAQ)!
Vinyl Tile & Vinyl Plank
Carpet Tile, Fiberglass Backed Sheet Vinyl
Rubber Tile, Rubber Stair Treads
(over porous substrates)
TR-8
1/16″ x 1/16″ x 1/16″
Square notch
200 sq. ft./gal. spread rate
Vinyl Tile & Vinyl Plank
Carpet Tile, Fiberglass Backed Sheet Vinyl
(over non-porous substrates)
Vinyl Sheet Goods,
Rubber Sheet Goods
(over porous substrates)
TR-13
1/16″ x 1/32″ x 1/32″
U notch
300 sq. ft./gal. spread rate
Cork Tile/Cork/Rubber /Foam Underlayment
(up to 1/4”)
TR-3
3/32″ x 3/32″ x 3/32″ V notched
120 sq. ft/gal spread rate
Cork Tile/Cork/Rubber /Foam Underlayment (greater than 1/4”)
TR-5
1/8″ x 1/8″ x 1/8″ square notched
80 sq. ft/gal spread rate
Vinyl Sheet Goods,
Rubber Sheet Goods
(over non-porous substrates)
1/16″ x 1/32″ x 5/64″
U notch
400 sq. ft./gal. spread rate
Recommended Applicator /Coverage: A smooth surface paint roller up to a 3/8″ nap is recommended. Coverage over porous substrates is up to 350 sq. ft./gal. (8.6 sq. meters/liter). Coverage over non-porous substrates is up to 400 sq. ft./gal. (9.8 sq. meters/liter). NOTE: Coverage is approximate and may vary depending on porosity of substrate and the amount of adhesive applied.
